8~12GHz, Stepped frequency10MHz, Stray within the band55dBc, SMA
To check stock availability, search under "In-stock Products" on the Dianzibuy store.
Any change to the content of this page is subject to change without notice. Please confirm the specifications before ordering.
Products must not be used for any unlawful purpose; the customer bears any loss arising from unlawful use.
| Parameters | Min | Typical | Max | Units |
|---|---|---|---|---|
| Frequency | 8 | ~ | 12 | GHz |
| Stepped frequency | 10 | MHz | ||
| Output amplitude consistency | ±1 | dB | ||
| Stray within the band | 55 | dBc | ||
| In band harmonics | 30 | dBc | ||
| Two way phase difference (design guarantee) | 5 | ° | ||
| power stability | ±0.25 | dB |
| 1 | Power supply (+12V) |
| 2 | TXA(RS-232) |
| 3 | RXA(RS-232) |
| 4 | NC |
| 5 | GND |
| 6 | ASK Input |
| 7 | NC |
| 8 | NC |
| 9 | GND（地) |
| Connector | SMA-K |
| Connector material | Stainless steel |
| Impedance | 50Ω |
| Surface | Nickel plating |
| Working voltage | +12V |
| Working current | 300mA |
| Operation Temp. | -25~+50℃ Design assurance |
| Quality Grade | Industrial grade |
| Other | Has signal attenuation, signal power division, signal pulse modulation functions, typical output power: 10 ± 0.25dBm (10.5GHz) |
| byte | signal description | Interface model | type | Significant bit | Typ. | Note |
|---|---|---|---|---|---|---|
| 1 | Start Frame | RS232 | Short | 8 | 0xaa | |
| 2 | frequency code | RS232 | U8 | 16 | 0x2904 | Frequency code 10500MHz: 0x2904 |
| 1 | Attenuation code | RS232 | U8 | 8 | 0x00 | Attenuation code 0dB: 0x0000 Attenuation code 1dB: 0x0001 Attenuation code 31dB: 0x001f |
| 1 | ASK selection | RS232 | U8 | 8 | 0 | ASK internal: 0x01 ASK external: 0x00 |
| 1 | ASK frequency | RS232 | U8 | 8 | 1 | 1~100KHz |
| 1 | End of Frame | RS232 | U8 | 8 | 0x55 |
1. Store in an environment with humidity less than 25%, pay attention to dust and static electricity prevention;
If the overall temperature of the product is greater than 125 ℃, please consult with us before placing an order;
3. Clean the surface of the product and do not soak it in cleaning solution for cleaning;
.
Send us your requirements — our engineers will respond within one working day.
