To check stock availability, search under "In-stock Products" on the Dianzibuy store.
Any change to the content of this page is subject to change without notice. Please confirm the specifications before ordering.
Products must not be used for any unlawful purpose; the customer bears any loss arising from unlawful use.

Downloads

↓ Datasheet 321 KB ↓ S-Parameters 937 KB ↓ 3D Model 706 KB

Main specifications

Parameters	Min	Typical	Max	Units
Frequency	150	~	2700	MHz
Gain	50			dB	@Pout：47dBm
Gain flatness		±2.5		dB	@Pout：47dBm
Input VSWR			1.8
Psat	47			dBm
Efficiency		18		%
Power		0		dBm
Spurious suppression	60			dBc	@Pout：47dBm
Harmonic Rejection		15		dBc	@Pout：47dBm

Other parameters

Connector	SMA-F or K
供电与控制接口	D-SUB7W2
Impedance	50Ω
Surface	Nickel plating
Working voltage	+48V
Working current	10A
Operation Temp.	-35~+65℃ Design assurance

控制接口引脚定义（D-SUB7W2）

No.	definition	Note
A1	+48V	V+
A2	GND	GND
1	EN	0（OFF）:0V；1（ON）：+3.3~5V
2	VSWR Alram
3	TEMP Alram
4	CURR Alram
5	GND

典型测试数据（Pout:47dBm）

F（GHz）	0.15	0.2	0.6	1	1.4	1.8	2.2	2.7
Gain(dB)	52.56	52.40	53.92	52.22	53.56	52.73	56.65	56.78
Ids（A）	4.52	4.97	4.90	5.52	5.06	4.79	4.97	5.06
η（%）	23.04	20.95	21.25	18.87	20.58	21.74	20.95	20.58
Spurious suppression	72.00	70.00	67.00	68.00	68.00	70.00	72.00	72.00
2nd harmonic rejection (dBc)	13.50	26.30	27.70	20.20	18.50	25.10	23.00	48.50
3rd harmonic rejection (dBc)	23.50	30.40	27.30	28.50	39.10	51.30	52.10	64.80
Input VSWR	1.25	1.18	1.10	1.06	1.06	1.09	1.20	1.16

Reference picture

Configuration(mm)

Typical test curve

Note

Store in an environment with humidity less than 25%, pay attention to dust and static electricity prevention;

Please pay attention to the power consumption of the product and consider the issue of amplifier heat dissipation during design;

Working or storage temperature less than 125 ℃;

Clean the surface of the product, do not soak the product in cleaning solution for cleaning.

Power amplifier DPA8-150-2700-9427