29.5~31.5GHz, Gain26dB, 2.92
To check stock availability, search under "In-stock Products" on the Dianzibuy store.
Any change to the content of this page is subject to change without notice. Please confirm the specifications before ordering.
Products must not be used for any unlawful purpose; the customer bears any loss arising from unlawful use.
| Parameters | Min | Typical | Max | Units |
|---|---|---|---|---|
| Frequency | 29.5 | ~ | 31.5 | GHz |
| Gain | 26 | dB | ||
| Gain flatness | 1.5 | dB | ||
| 增益平波动 | ±1 | dB@-15℃~+50℃ | ||
| VSWR | 1.5 | |||
| 线性工作区输出 | 25 | dBm | ||
| P-1dB | 29 | dBm | ||
| Spur reduction | 60 | dBc | ||
| Harmonic Rejection | 55 | dBc |
| Connector | 2.92 |
| Connector material | Stainless steel |
| Impedance | 50Ω |
| Working voltage | +12V |
| Working current | 1000mA |
| Operation Temp. | -15~+50℃ Design assurance |
| Other | 负载失配保护、过温保护、输入信号过载保护，TTL高电平指示 |
| No. | definition | Note |
|---|---|---|
| 1、2 | VD | +12V供电 |
| 3、4 | GND | Ground |
| 5、9 | NC | backup |
| 6 | TTL1 | 负载失配指示，失配为高电平，正常工作为低电平 |
| 7 | TTL2 | 过温指示，过温为高电平，正常工作为低电平 |
| 8 | TTL3 | 输入信号过载指示，输入信号过载为高电平，正常工作为低电平 |
Store in an environment with humidity less than 25%, pay attention to dust and static electricity prevention;
Please pay attention to the power consumption of the product and consider the issue of amplifier heat dissipation during design;
Working or storage temperature less than 125 ℃;
Clean the surface of the product, do not soak the product in cleaning solution for cleaning.
Send us your requirements — our engineers will respond within one working day.
