950~2150MHz, Gain60dB, Noise figure3dB, P-1dB15dBm, SMA
To check stock availability, search under "In-stock Products" on the Dianzibuy store.
Any change to the content of this page is subject to change without notice. Please confirm the specifications before ordering.
Products must not be used for any unlawful purpose; the customer bears any loss arising from unlawful use.
| Parameters | Min | Typical | Max | Units |
|---|---|---|---|---|
| Frequency | 950 | ~ | 2150 | MHz |
| Gain | 60 | dB | ||
| Gain flatness | ±2 | dB | ||
| Noise figure | 3 | dB | ||
| VSWR | 2 | |||
| P-1dB | 15 | dBm | ||
| Attenuation | 60 | dB |
| Connector | SMA-F or K |
| Impedance | 50Ω |
| Working voltage | +12V |
| Working current | 400mA |
| Operation Temp. | -40~+60℃ Design assurance |
| No. | definition | Note |
|---|---|---|
| 1 | VD | +12V power supply |
| 2 | GND | Ground |
| 3 | TTL0 | 0.5dB attenuation control |
| 4 | TTL1 | 1dB Attenuation control |
| 5 | TTL2 | 2dB attenuation control |
| 6 | TTL3 | 4dB attenuation control |
| 7 | TTL4 | 8dB ATT control |
| 8 | TTL5 | 16dB Attenuation control |
| 9 | TTL6 | 30dB attenuation control |
Store in an environment with humidity less than 25%, pay attention to dust and static electricity prevention;
Please pay attention to the power consumption of the product and consider the issue of amplifier heat dissipation during design;
If the amplifier is directly connected to the antenna, electrostatic protection or limiter protection should be applied.
Working or storage temperature less than 125 ℃;
Clean the surface of the product, do not soak the product in cleaning solution for cleaning.
Send us your requirements — our engineers will respond within one working day.
