Frequency 30~6000, Gain 40, Noise figure, Supports 220V AC and DC power supply
To check stock availability, search under "In-stock Products" on the Dianzibuy store.
Any change to the content of this page is subject to change without notice. Please confirm the specifications before ordering.
Products must not be used for any unlawful purpose; the customer bears any loss arising from unlawful use.
| Parameters | Min | Typical | Max | Units |
| Frequency | 30 | ~ | 6000 | MHz |
| Gain | 40 | dB | ||
| Gain flatness | ±3 | dB | ||
| Noise figure | 2 | dB | ||
| VSWR | 2.5 | |||
| P-1dBm | 10 | dBm | ||
| Spur reduction | 70 | dBc | ||
| Harmonic Rejection | 15 | dBc | ||
| OIP3 | 22 | dBm |
| Connector | SMA-K |
| Connector material | Stainless steel |
| Impedance | 50Ω |
| Surface | Anodizing treatment (blue) |
| Operation Temp. | -20~+50℃ Design assurance |
| Characteristic | Supports 220V AC and DC power supply |
| RFin | 信号输入 |
| RFout | 信号输出 |
| DC输入 | +12V直流电压输入端 |
| GND | 接地端口，使用时请先接好 |
| AC输入 | Input 220v AC |
| 1 | Instructions for using the power switch | 220V and DC power supply cannot be used simultaneously. |
| 1 | Standard configuration | AC power cord |
| 2 | Standard configuration | Equipped with a power adapter |
| 1 | Clean the surface of the product, do not soak the product in cleaning solution for cleaning. |
| 2 | If the temperature is higher than 125℃, consult with us before ordering. |
Send us your requirements — our engineers will respond within one working day.
