Frequency0.2~40GHz, Gain25dB, Noise figure5dB, P-1dB output power8dBm
To check stock availability, search under "In-stock Products" on the Dianzibuy store.
Any change to the content of this page is subject to change without notice. Please confirm the specifications before ordering.
Products must not be used for any unlawful purpose; the customer bears any loss arising from unlawful use.
| Parameters | Min | Typical | Max | Units | Units |
|---|---|---|---|---|---|
| Frequency | 0.2 | ~ | 40 | GHz | |
| Gain | 25 | dB | |||
| Gain flatness | ±1 | dB | Any 1.2GHz | ||
| Gain consistency | 2 | dB | |||
| Noise figure | 5 | dB | |||
| VSWR | 2.5 | ||||
| P-1dB output power | 8 | dBm |
| Connector | 2.92-K |
| Connector material | Stainless steel |
| Impedance | 50Ω |
| Surface | Conductive oxidation |
| Operation Temp. | -20~+60℃ Design assurance |
| Characteristic | Dual power supply mode selectable |
| Other | Module power supply+12V |
| 1 | Power supply method 1 | DC power +12~+15V |
|---|---|---|
| 2 | Power supply method 2 | AC 220V power supply (optional) |
| 2 | Shell Material | Shell aluminum material |
| 3 | Instructions for using the power switch | The switch defaults to neutral to achieve frequency band switching function. |
| 1 | Optional | Power adapter( 2A, 12V ) |
|---|---|---|
| 2 | Optional | AC power cord |
| 1 | Clean the surface of the product, do not soak the product in cleaning solution for cleaning. |
| 2 | If the temperature is higher than 125℃, consult with us before ordering. |
| 3 | Pay attention to electrostatic protection. |
Send us your requirements — our engineers will respond within one working day.
